Jolting Test Apparatus

IS : 1727-1967, IS : 4031-1968, ASTM C - 349-64

Item Code: UCMT-503

For making standered rectangular specimens of 40 x 40 x 160mm. of portland and pozzolana cement mortar for determining the transverse strength.

Specifications : The jolting Apparatus consists of rectangular table rigidly connected by two supports arms to a spandle at a horiziontal distance of 800mm from the center of the table beneath which is a stop with a rounded upper surface. The table can be raised allowed to fall freely on the stop by cam which is connected to a motor or a gear box  through a V-belt and a pulley's. The cam rotates at the rate 60rev./min. A stroke counter fitted with micro switch is provided which stops the machine after 60 jolts. Locating pins are provided for mounting the mould compartment on the table. The mould surmounted by the hopper can be clamp rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230Volts, single phase, A.C. supply.

Spares and accessories :

1. Steel Mould with base plate having three compartments each having 40mm x 40mm x 160mm. internal diamension.
2. Apparatus for demoulding the specimen.

Contact Us for further details & purchase information on Jolting Test Apparatus.

Planetary Mixer

Item Code: UCMT-504

It is used for mixing coments pastes, mortars and pozzolanas.

Specifications : The Apparatus consists of an epicyclic type stainless steel paddel imparting both planetary and revolving motion, by means of gears. It has two speeds of 140+5r..p.m. and 285+10r.p.m. with planetary motions of approximately 62r.p.m. + 5r.p.m. and 125r.p.m. +- 10r.p.m. respectively. The stand of the mixer has arrangement to raise or lower bowl. Complete with stainless steel bowl of about six liters capacity. Suitable for operation on 230 Volts, 50 Cycles, Single phase, A.C.supply

Contact Us for further details & purchase information on Planetary Mixer.